D I M E N S I O N S //

SMALL  |  up to 36"L x 36"W x 14" - 17"H  | starting at $2290 - $3290+

MEDIUM  |  up to 48"L x 48"W x 14" - 17"H  |  starting at $4590 - $5590+

LARGE  |  up to 60"L x 60"W x 14" - 17"H |  starting at $5990 - $6990+

W O O D   F I N I S H   O P T I O N S   //

Each wood finish has different durability properties and maintenance requirements. All wood finish options are low-VOC for peace of mind, and durable for everyday use.

1.  ECO-FRIENDLY HARDWAX OIL FINISH    |  Our preferred finishing method and product, made from environmentally-friendly components for eco-conscious customers. Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to common liquid spills. The finish maintains the natural look and feel of the wood, all while offering protection and durability. One major advantage of hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (products can be found here: Osmo Liquid Wax Cleaner and here: Osmo Hardwax Oil Finish). To avoid minor signs of use, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur to maintain the condition of the wood. We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne), and can be continuously DIY applied to refresh the wood on your table.
COST | $0 (included in pricing)

2.  CONVERSION VARNISH  |  This finish offers a nice satin sheen with an exceptional durable ‘film’ finish. In our earlier stages after trying out a dozen different finishes, we decided upon using conversion varnish due to the desired sheen of the finish in conjunction with it's superior durability. It is one of the most durable finishes available, while it's chemical makeup allows for elasticity with seasonal wood movement. However it’s important to note that the finish is difficult to repair in the event that any significant damages occur that exposes bare wood, where the wood would need to be transported to a professional to restore the entire surface. For these reasons, we also offer a more easily DIY-maintained finish, Osmo hardwax oil (outlined above in option 1).
UPGRADE COST |  +$150

3.  WATER-BASED CONVERSION VARNISH  |  This option is an ultra-low VOC, water-based wood finish that delivers a quality level similar to oil-based coatings, but without the hazards of traditional solvents. A quick-drying finish that’s true to traditional finishing methods while delivering high-performance durability. The finish has a tendency to "soften" the wood color and give a very slight grey undertone effect with a satin sheen, retaining the natural character of the wood grain.
UPGRADE COST  |  +$95

Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/