D I M E N S I O N S //

SLAB WOOD: Pricing is determined by the length of the “raw” slab that you choose for your project and can vary from the pricing examples below. We will provide images of available slabs in your projects size range, in which some may be much longer than your project requires that we cut down to meet the project size needs.

6 ft+ | slab walnut | 72" - 82"L x 30" - 48"W x 29.5"H | $4990 - $5890

7 ft + | slab walnut | 84" - 94"L x 30" - 48"W x 29.5"H | $5890 - $7090

8 ft + | slab walnut | 96" - 106"L x 30" - 48"W x 29.5"H | $7090 - $9090

9 ft + | slab walnut | 108" - 120"L x 30" - 48"W x 29.5"H | $9090 - $10000

up to 14ft | slab walnut | 120"+ x 30" - 48"W x 29.5"H | please inquire for pricing

M A T E R I A L O P T I O N S //

DIMENSIONAL LUMBER: We can also use FSC-certified dimensional hardwood lumber for this design for reduced pricing. Below an outline of cost based on common grade dimensional walnut as an example to compare to slab wood.

PLEASE NOTE - We start offering this design at 6’ in length so that seating is most accommodating. We do not recommend going smaller than 66” to be able to seat 4 people at the table (2 people on each side, no seating at head/foot).

Pricing above reflects the cost for the use of “common” grade dimensional walnut, which is a slightly more rustic looking grade of material with characteristics that include knots, slight traces of sapwood and color variation, and overall more wild in character and grain pattern. The design can also be upgraded to “prime” dimensional walnut, which is a higher grade of FSC-certified lumber with characteristics that include few-to-no knots, minimal sapwood or color variation, and mild/mellow grain patterns (pictured). The material is more expensive for us to source than common walnut, added costs are reflected below per size/material.

Other materials and material grades are available and can be viewed in the following link:

MATERIALS

W O O D F I N I S H O P T I O N S //

ECO-FRIENDLY HARDWAX OIL FINISH | Our preferred finishing method and product, made from environmentally-friendly components for eco-conscious customers. Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to common liquid spills. The finish maintains the natural look and feel of the wood, all while offering protection and durability. One major advantage of hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (products can be found here: Osmo Liquid Wax Cleaner and here: Osmo Hardwax Oil Finish). To avoid minor signs of use, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur to maintain the condition of the wood. We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne), and can be continuously DIY applied to refresh the wood on your table.

Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/

View additional wood finish options in the following link:

WOOD FINISH OPTIONS

S T E E L F I N I S H //

COLOR POWDER-COAT | Powder-coating allows us to achieve just about any color, matte or satin sheen. Powder-coating is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Out bases are professionally powder-coated by a professional steel shop in our neighborhood who charges accordingly for different dimensions. Stock colors include satin black or matte black, silver, charcoal, or dark bronze. We can also custom order a color specific for your project through Prismatic Powders (costs may vary: https://www.prismaticpowders.com/shop/powder-coating-colors)
COST | (stock colors included in pricing)
*Some special order colors will require an upgrade cost*

C H O O S I N G T H E R I G H T S I Z E //

For use as a dining or kitchen table, bar or conference table: If you are unsure of the exact dimensions your needs require, please consider the following basic guidelines:

Provide each guest a minimum of 24” of personal space at the dining table (chairs range from apprx. 16-20" and require space on each side to allow guests to seat comfortably).
Add an extra 12 inches of length to the table at each end for those seated at the head and foot of the table for personal legroom.
Allow for at least 36 inches between the dining table and any walls or other furniture.
Keep the table legs/base in mind, whether they may impede seating or leg room or not on the sides of the table. If the legs prohibit a person from sitting right in front of them, subtract the dimensions of the leg from the overall length of the table side to determine the available space for seating.

'Foundation' Dining Table // Slab Walnut // Bent Plate Steel Legs

'Foundation' Dining Table // Slab Walnut // Bent Plate Steel Legs

© 2023 MEZ WORKS furniture | south lake tahoe, ca | contact@mezworks.com