'Griffin' Beveled Edge Ellipse Elm Dining Table // Steel Intersecting-X Base

'Griffin' Beveled Edge Ellipse Elm Dining Table // Steel Intersecting-X Base

from 3,590.00

All of our designs are made-to-order. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

S U M M A R Y //

Full Project Details ~ Coming soon!

S H I P P I N G //

Please send zip code for an accurate carrier quote.

D E L I V E R Y //

Some orders within California or Northern NV qualify for personal delivery and installation. Please send zip code for delivery costs to your area.

Add To Cart

O P T I O N S //

Pricing outlined below is for a dimensional lumber version of this table (not pictured). Please reach out of you are interested in having us source a slab instead (add approximately +$1000-$1500 to pricing below), or if you'd like photo examples of dimensional lumber to reference.

55° BASE  |  SMALL
OPTION A: "THIN"  |  55° ANGLE  |  1x2" & 1.5x3" steel  |  apprx. 44.5"L x 23.5" - 33”W x 28"H
OPTION B: "THICK"  |  55° ANGLE  |  2x2" & 2x3" steel  |  apprx. 44.5"L x 23.5" - 33”W x 28"H  |  *add +$100 to pricing below*

SMALL |  72" - 76"L x 36" - 40"W x 29.5”H  |  $3590

OPTION A: "THIN"  |  60° ANGLE  |  1x2" & 1.5x3" steel  |  apprx. 54.5"L x 23.5" - 33”W x 28"H
OPTION B: "THICK"  |  60° ANGLE  |  2x2" & 2x3" steel  |  apprx. 54.5"L x 23.5" - 33”W x 28"H  |  *add +$100 to pricing below*

MEDIUM  |  up to 84"L x 36" - 40"W x 29.5”H  |  $3990

65° BASE  |  LARGE - XL
OPTION A: "THIN"  |  65° ANGLE  |  1x2" & 1.5x3" steel  |  apprx. 66"L x 33”W x 28"H
OPTION B: "THICK"  |  65° ANGLE  |  2x2" & 2x3" steel  |  apprx. 66"L x 33”W x 28"H  |  *add +$150 to pricing below*

LARGE  |  up to 96"L x 36" - 40"W x 29.5”H  |  $4390

XLARGE  |  up to 108"L x 36" - 40"W x 29.5”H  |  $4690

70° BASES  |  XXL - XXXL
OPTION A: "THIN"  |  70°ANGLE  |  1x2" & 1.5x3" steel  |  84"L x 33”W x 28"H
OPTION B: "THICK"  |  70°ANGLE  |  2x2" & 3x3" steel  |  84"L x 33”W x 28"H  |  *add +$150 to pricing below*

XXLARGE  |  up to 120"L x 36" - 40"W x 29.5”H  |  $5090

W O O D   F I N I S H   O P T I O N S   //

Each wood finish has different durability properties and maintenance requirements. All wood finish options are low-VOC for peace of mind, and durable for everyday use.

1.  ECO-FRIENDLY HARDWAX OIL FINISH    |  Our preferred finishing method and product, made from environmentally-friendly components for eco-conscious customers. Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to common liquid spills. The finish maintains the natural look and feel of the wood, all while offering protection and durability. One major advantage of hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (products can be found here: Osmo Liquid Wax Cleaner and here: Osmo Hardwax Oil Finish). To avoid minor signs of use, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur to maintain the condition of the wood. We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne), and can be continuously DIY applied to refresh the wood on your table.
COST | $0 (included in pricing)

2.  CONVERSION VARNISH  |  This finish offers a nice satin sheen with an exceptional durable ‘film’ finish. In our earlier stages after trying out a dozen different finishes, we decided upon using conversion varnish due to the desired sheen of the finish in conjunction with it's superior durability. It is one of the most durable finishes available, while it's chemical makeup allows for elasticity with seasonal wood movement. However it’s important to note that the finish is difficult to repair in the event that any significant damages occur that exposes bare wood, where the wood would need to be transported to a professional to restore the entire surface. For these reasons, we also offer a more easily DIY-maintained finish, Osmo hardwax oil (outlined above in option 1).

3.  WATER-BASED CONVERSION VARNISH  |  This option is an ultra-low VOC, water-based wood finish that delivers a quality level similar to oil-based coatings, but without the hazards of traditional solvents. A quick-drying finish that’s true to traditional finishing methods while delivering high-performance durability. The finish has a tendency to "soften" the wood color and give a very slight grey undertone effect with a satin sheen, retaining the natural character of the wood grain.

4. *OPTIONAL* | “WHITEWASH” WOOD BLEACHING TREATMENT | This treatment involves applying several coats of a bleach solution to the wood prior to applying the finish of your choice. The outcome lightens the color of the wood to a softer shade, removing some of the yellowish tones for subtler coloring. Can be used on ash or white oak, and must include the conversion varnish finish.

5. *OPTIONAL* | COLORED DYE | We have a variety of wood dyes to change or enhance the natural color of the woods we use. A "darkwash" will bring the color of the wood to a richer, dark brown tone. A "graywash" will give the overall color of the wood a gray overtone. An "ebonizing" treatment will blacken the wood while leaving natural wood undertones. Most of these treatments can be done on white oak, ash or walnut, and must include the conversion varnish finish.

*We can also source a variety of other wood species. Please inquire to contact@mezworks.com for details*

Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/

S T E E L   F I N I S H   O P T I O N S   //

1.  CLEAR POWDER-COAT  |  This will preserve the natural color of the steel, provides protection from staining and rusting, and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
COST  |  $0  (included in pricing)

2.  COLOR POWDER-COAT  |  *AS PICTURED IN LISTING PHOTOS*  |  Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
COST | $0 (included in pricing)
*Some special order colors will require an upgrade cost*

3.  BLACK MAGIC PATINA + CLEAR POWDER-COAT  |  This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability.

C H O O S I N G   T H E   R I G H T   S I Z E   //

For use as a dining or kitchen table, bar or conference table: If you are unsure of the exact dimensions your needs require, please consider the following basic guidelines:

  • Provide each guest 24-30 inches of space at the dining table (chairs range from apprx 16-20" and require at least 6" of space on each side to allow guests to seat comfortably)

  • Add an extra 12 inches at each end for those seated at the head and foot of the table

  • Allow for at least 36 inches between the dining table and any walls or other furniture