Beveled Profile 'Sakamoto' Clear-Walnut Bench // Steel Trapezoid Legs

SakamotoSet Shop_26.jpg
SakamotoSet Shop_24.jpg
SakamotoSet Shop_16.jpg
SakamotoSet Shop_23.jpg
SakamotoSet Shop_17.jpg
SakamotoSet Shop_02.jpg
SakamotoSet Shop_26.jpg
SakamotoSet Shop_24.jpg
SakamotoSet Shop_16.jpg
SakamotoSet Shop_23.jpg
SakamotoSet Shop_17.jpg
SakamotoSet Shop_02.jpg

Beveled Profile 'Sakamoto' Clear-Walnut Bench // Steel Trapezoid Legs

from 845.00

Available for custom orders only - Exact piece not available. Sizes, pricing and lead times will vary. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

*Currently accepting orders for pre-holiday December 2018 delivery*

S U M M A R Y   //

The 'Sakamoto' collection encompasses minimalism in it's clarity of design. Clear-walnut with minimal knots and soft grain character paired with a simple tapered base provides an elegant but versatile look that can integrate into any room. Beveled edges implemented on the seat back and front edge incorporates a softness into the design.

For the full dining set listing, please follow this link: http://www.mezworks.com/store/clear-walnut-squaw-dining-table-steel-trapezoid-legs-lsp6h-xdmxn

S H I P P I N G //

Please send zip code for an accurate carrier quote.

D E L I V E R Y //

Some orders within California or Northern NV qualify for personal delivery and installation. Please send zip code for delivery costs to your area.

_____________________________________________________

Please scroll down past photos on the left to view size options, material options, steel finish options, and/or wood finish options.

<<<

SIZE:
Quantity:
Add To Cart

O P T I O N S   //

A:  "CLEAR" WALNUT  |  *AS PICTURED IN LISTING PHOTOS*  |  Highest grade of FSC-certified dimensional walnut lumber. Characteristics include few knots, minimal sapwood or color variation, and mild/mellow grain patterns.

SMALL "CLEAR" BENCH  |  48" - 58"L x 14" - 16"W  |  $945
SML/MED "CLEAR" BENCH  |  60" - 70"L x 14" - 16"W  |  $1095
MEDIUM "CLEAR" BENCH  |  72" - 82"L x 14" - 16"W  |  $1245
MED/LRG "CLEAR" BENCH  |  84" - 94"L x 14" - 16"W  |  $1395
LARGE "CLEAR" BENCH  |  96" - 106"L x 14" - 16"W  |  $1545
XL "CLEAR" BENCH  |  108" - 120"L x 14" - 16"W  |  $1695

B:  "COMMON" WALNUT  |  FSC-certified dimensional walnut lumber, which is less expensive than "clear" walnut. Characteristics include knots, traces of sapwood and color variation, and overall more wild in character and grain pattern.

SMALL "COMMON" BENCH  |  48" - 58"L x 14" - 16"W  |  $845
SML/MED "COMMON" BENCH  |  60" - 70"L x 14" - 16"W  |  $995
MEDIUM "COMMON" BENCH  |  72" - 82"L x 14" - 16"W  |  $1145
MED/LRG "COMMON" BENCH  |  84" - 94"L x 14" - 16"W  |  $1295
LARGE "COMMON" BENCH  |  96" - 106"L x 14" - 16"W  |  $1445
XL "COMMON" BENCH  |  108" - 120"L x 14" - 16"W  |  $1595

W O O D   F I N I S H   O P T I O N S   //

We have two different wood finish options to choose from, each having different durability properties and maintenance requirements:

1.  HARDWAX-OIL FINISH  |  Our newest finish option, Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to water, soda, wine, etc. The finish maintains the natural look and feel of the wood, all while offering protection. One major advantage to the hardwax oil is that it’s easily repairable/maintained, and can be spot repaired with no sanding necessary. We are in a transitional period in which we are trying to reduce the amount of toxins in the products we use, and not only are we committed to reducing the amount of VOC (Volatile Organic Compounds) we emit for environmentally conscious reasons, but we are also trying to reduce the amount of toxins that our crew and clients are exposed to for health reasons. Eventually, we plan to phase out the conversion varnish entirely and only use the hardwax-oil finish, but for now we will offer both finish options.
COST  |  $0 (included in pricing)

2.  CONVERSION VARNISH FINISH  |  In our earlier stages after trying out a dozen different finishes, we decided upon the conversion varnish in 2012 due to the desired sheen of the finish in conjunction with it's superior durability over previous products we tested, and additionally appealing was that it's a low-VOC product. The finish offers a nice satin sheen with an exceptional durable ‘film’ finish comprised of two coats. It is one of the most durable finishes available, yet it's chemical makeup allows for elasticity with seasonal wood movement. However, the finish is very difficult to repair in the event that any damages occur, where the wood would require being transported to a professional to refinish the entire piece to restore it to new condition, even if the damage is minor (as opposed to the Osmo hardwax oil finish outlined above, which is a quick and easy do-it-yourself fix). The process of applying the conversion varnish also much more laborious and time-consuming and thus adds additional costs to the project.
UPGRADE COSTS:
SM-MD  |  +$95
M/L-XL  |  +$145

*Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/*

S T E E L   F I N I S H   O P T I O N S   //

1.  CLEAR COAT FINISH  |  This will preserve the natural color of the steel, but will protect it from staining and rusting and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
UPGRADE COST  |  +$145

2.  POWDER-COAT FINISH  |  Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
UPGRADE COST  |  +$145

3.  BLACK MAGIC PATINA FINISH + CLEAR COAT  |  *AS PICTURED IN LISTING PHOTOS*  |  This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability. 
UPGRADE COST  |  +$175