'Zeeva' Leaved Walnut and Steel Dining Table

WalnutZeeva_12.jpg
WalnutZeeva_10.jpg
WalnutZeeva_07.jpg
WalnutZeeva_13.jpg
WalnutZeeva_02.jpg
WalnutZeeva_03.jpg
WalnutZeeva_19.jpg
WalnutZeeva_22.jpg
WalnutZeeva_21.jpg
WalnutZeeva_12.jpg
WalnutZeeva_10.jpg
WalnutZeeva_07.jpg
WalnutZeeva_13.jpg
WalnutZeeva_02.jpg
WalnutZeeva_03.jpg
WalnutZeeva_19.jpg
WalnutZeeva_22.jpg
WalnutZeeva_21.jpg

'Zeeva' Leaved Walnut and Steel Dining Table

from 2,445.00

Available for custom orders only - Exact piece not available. Sizes, pricing and lead times will vary. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

S U M M A R Y   //

This is a custom-designed leaved dining table using CA claro walnut, paired with an exposed, flush steel frame. The main wooden sections are secured to the frame using 5/16-18 threaded inserts and grade 8 hex flange bolts. The leaf ends are completely removable, easily sliding out from tubular steel sleeves on the underside of the table.

We milled and joined each piece, very purposefully placing each component where we felt would be most aesthetically pleasing. We utilized pieces that had a nice offering of sapwood and interesting grain patterns that would flow together symbiotically. 

The mild steel base was built in-house by our resident steel fabricator, Thatcher Unsworth, who collaborates with us to design truly one-of a kind steel and wooden creations. 

S H I P P I N G   &   D E L I V E R Y   //

Please send zip code for an accurate carrier quote.

Size:
Quantity:
Add To Cart

D I M E N S I O N S   //

Pricing below is for table only, please contact us regarding bench pricing.

The legs in the example photos have an upgraded black magic patina finish, but please note that the option is an upgrade and not included in standard pricing. Finish upgrade options are listed below the dimension options.

If you don't see your preferred dimensions below, please let us know and we can outline a custom quote for you

[Leaf ends are 12 inches long unless otherwise requested, prices vary]

SMALL | $2445
1x3" steel | 1" wood thickness
main | 48"L x 30" - 32"W x 28" - 30"H
leaves | 12"L x 30" - 32"W
overall table w/ leaves attached | 72"L x 30" - 32"W x 28" - 30"H
*SEATS 4-6*

SML WIDE | $2745
1x3" steel | 1" wood thickness
main | 48"L x 34" - 36"W x x 28" - 30"H
leaves | 12"L x 34" - 36"W
overall table w/ leaves attached | 72"L x 34" - 36"W x 28" - 30"H
*SEATS 4-6*

MEDIUM | $3445
1x3" steel | 1" wood thickness
main | 72"L x 36" - 40"W x 28" - 30"H
leaves | 12"L x 36" - 40"W
overall table w/ leaves attached | 96"L x 36" - 40"W x 28" - 30"H
*SEATS 6-8*

MED WIDE | $3745
1x3" steel | 1" wood thickness
main | 72"L x 42" - 48"W x 28" - 30"H
leaves | 12"L x 42" - 48"W
overall table w/ leaves attached | 96"L x 42" - 48"W x 28" - 30"H
*SEATS 6-8*

LARGE | $3895
1.5x3" steel | 1.5" wood thickness
main | 96"L x 36" - 40"W x 28" - 30"H
leaves | 12"L x 36" - 40"W
overall table w/ leaves attached | 120"L x 36" - 40"W x 28" - 30"H

LRG WIDE | $4195
1.5x3" steel | 1.5" wood thickness
main | 96"L x 42" - 48"W x 28" - 30"H
leaves | 12"L x 42" - 48"W
overall table w/ leaves attached | 120"L x 42" - 48"W x 28" - 30"H

CUSTOM SIZES ALSO AVAILABLE, PLEASE INQUIRE FOR PRICING

F I N I S H   O P T I O N S   O N   S T E E L   //

1. STANDARD CARNAUBA WAX FINISH | This will allow the color of the steel to remain natural and bright. The steel is ground and polished, followed by several applications of carnauba wax. We will supply you with application instructions and a small wax tin that should last about 5-10 years. Application is simple, rubbing a modest amount on, allowing it to dry, and then rubbing off the excess. 2 applications every few years for maximum effect. Not recommended for humid or coastal climates.
COST | +$0 (included)

2. CLEAR COAT FINISH | This will preserve the natural color of the steel, but will protect it from staining and rusting and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
UPGRADE COST | starting at +$145 - $295

3. BLACK MAGIC PATINA FINISH + CLEAR COAT | This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability.
UPGRADE COST | starting at +$195 - $345

4. POWDER-COAT FINISH | Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
UPGRADE COST | starting at +$225 - $445

C H O O S I N G   T H E   R I G H T   S I Z E   //

In the event that you require this piece to be made larger for dining table use, if you are unsure of the exact table size you'll need, consider the following basic guidelines:

-  First determine the maximum number of guests you wish to have room to seat
-  Provide each guest 24-30 inches of space at the dining table (chairs range from apprx 16-20" and require at least 6" of space on each side to allow guests to seat comfortably)
-  Add an extra 12 inches at each end for those seated at the head and foot of the table
-  Allow for at least 36 inches between the dining table and any walls or other furniture