'Martis' Walnut and Steel Dining Table // Steel Reverse-Trapezoid Legs

MEZ_5436.jpg
MEZ_5459.jpg
MEZ_5428.jpg
MEZ_5514.jpg
MEZ_5414.jpg
MEZ_5449.jpg
MEZ_5469.jpg
MEZ_5463.jpg
MEZ_5503.jpg
MEZ_5436.jpg
MEZ_5459.jpg
MEZ_5428.jpg
MEZ_5514.jpg
MEZ_5414.jpg
MEZ_5449.jpg
MEZ_5469.jpg
MEZ_5463.jpg
MEZ_5503.jpg

'Martis' Walnut and Steel Dining Table // Steel Reverse-Trapezoid Legs

from 1,995.00

All of our designs are made-to-order. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

S U M M A R Y //

Currently accepting orders for February 2019 delivery.

The 'Martis' table reflects aspects of some of our earlier works, combining features from our original 'Streetsense' style table with our 'Zeeva' solid steel frame. The result ~ a dimensional walnut table with simple trapezoid legs and exposed steel stretcher that runs the length of the table. Walnut was the chosen material for the tabletop to add contrast to the other varying wood types in the modern mountain home, while the steel frame ties in the artichoke pendant lamps and stainless steel kitchen appliances.

S H I P P I N G //

Please send zip code for an accurate carrier quote.

D E L I V E R Y //

Some orders within California or Northern NV qualify for personal delivery and installation. Please send zip code for delivery costs to your area.

SIZE:
Quantity:
Add To Cart

D I M E N S I O N S   //

S M A L L  |  54" - 58"L x 30" - 32"W x 29.5”H  |  $1995
SML WIDE  |  54" - 58"L x 34" - 36"W x 29.5”H  |  $2195

S M L / M E D  |  60" - 70"L x 30" - 34"W x 29.5”H  |  $2395
SML/MED WIDE  |  60" - 70"L x 36" - 38"W x 29.5”H  |  $2595

M E D I U M  |  72" - 82"L x 30" - 34"W x 29.5”H  |  $2695
MED WIDE  |  72" - 82"L x 36" - 38"W x 29.5”H  |  $2895

M E D / L R G  |  84" - 94"L x 36" - 38"W x 29.5”H  |  $2995
MED/LRG WIDE  |  84" - 94"L x 40" - 44"W x 29.5”H  |  $3195

L A R G E  |  96" - 106"L x 36" - 38"W x 29.5”H  |  $3395
LRG WIDE  |  96" - 106"L x 40" - 44"W x 29.5”H  |  $3495
LRG XWIDE  |  96" - 106"L x up to 48"W x 29.5”H  |  $3595

X L A R G E |  108" - 120"L x 36" - 38"W x 29.5”H  |  $3895
XLG WIDE  |  108" - 120"L x 40" - 44"W x 29.5”H  |  $3995
XLG XWIDE  |  108" - 120"L x up to 48"W x 29.5”H  |  $4095

W O O D   F I N I S H   O P T I O N S   //

We have three different wood finish options to choose from, each having different durability properties and maintenance requirements:

1.  HARDWAX-OIL  |  Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to water, soda, wine, etc. The finish maintains the natural look and feel of the wood, all while offering protection and durability. In order to maintain the condition of the wood, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur. One major advantage to the hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (https://worldclasssupply.com/store/OSMO-Liquid-Wax-Cleaner.html?xid=nAvveExJm5amkDObEnAfw5nIUWZBHupu). We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne). 
COST  |  $0  (included in pricing)

2.  CONVERSION VARNISH  |  Since 2012 we have been using a spray-on low VOC conversion varnish. This finish offers a nice satin sheen with an exceptional durable ‘film’ finish. In our earlier stages after trying out a dozen different finishes, we decided upon the conversion varnish as our primary finish due to the desired sheen of the finish in conjunction with it's superior durability. It is one of the most durable finishes available, while it's chemical makeup allows for elasticity with seasonal wood movement. However it’s important to note that the finish is difficult to repair in the event that any significant damages occur that exposes bare wood, where the wood would need to be transported to a professional to restore the entire surface. For these reasons, we also offer a more easily maintained finish, a hardwax oil (outlined above in option 1).
UPGRADE COST  |  +$95

3.  WATER-BASED CONVERSION VARNISH  |  This option is an ultra-low VOC, water-based wood finish that delivers a quality level similar to oil-based coatings, but without the hazards of traditional solvents. A quick-drying finish that’s true to traditional finishing methods while delivering high-performance durability. The finish has a tendency to "soften" the wood color and give a very slight grey undertone effect with a satin sheen, retaining the natural character of the wood grain.
UPGRADE COST  |  +$95

All wood finish options are low-VOC for peace of mind, yet durable for everyday use. Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/

S T E E L   F I N I S H   O P T I O N S   //

1.  CLEAR POWDER-COAT  |  *AS PICTURED IN LISTING PHOTOS*  |  This will preserve the natural color of the steel, provides protection from staining and rusting, and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
UPGRADE COST:
SMALL - MED  |  +$195
LARGE - XLARGE  |  +$245

2.  COLOR POWDER-COAT  |  Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
UPGRADE COST:
SMALL - MED  |  +$195
LARGE - XLARGE  |  +$245

3.  BLACK MAGIC PATINA + CLEAR POWDER-COAT  |  This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability.
UPGRADE COST:
SMALL - MED  |  +$245
LARGE - XLARGE  |  +$295

C H O O S I N G   T H E   R I G H T   S I Z E   //

If you are unsure of the exact table size your needs require, consider the following basic guidelines:
- Provide each guest 24-30 inches of space at the dining table (chairs range from apprx 16-20" and require at least 6" of space on each side to allow guests to seat comfortably)
- Add an extra 12 inches at each end for those seated at the head and foot of the table
- Allow for at least 36 inches between the dining table and any walls or other furniture