'Lookout' Straight-Cut Walnut Slab Dining Table // Solid Steel 'Floating' Base

HerrodInstall__17.jpg
HerrodInstall__06.jpg
HerrodInstall__15.jpg
HerrodInstall__13.jpg
HerrodInstall__07.jpg
HerrodInstall__05.jpg
HerrodInstall__17.jpg
HerrodInstall__06.jpg
HerrodInstall__15.jpg
HerrodInstall__13.jpg
HerrodInstall__07.jpg
HerrodInstall__05.jpg

'Lookout' Straight-Cut Walnut Slab Dining Table // Solid Steel 'Floating' Base

from 3,995.00

All of our designs are made-to-order. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

S U M M A R Y //

Project collaboration with Ryan Group Architects located in Truckee, CA.

This design includes our "Photonics" floating base with a single slab of black walnut. We use 3/8" steel risers between the table top and steel base as to create the floating effect while masking the bolts that secure the top to the base. A removable 5th leg was added to the center of the table for additional support, while 3 hidden welded steel beams run width-wise attaching to the outer length beams to create a solid/single frame.

Due to the nature of the material and required drying times, there is a minimum of a 6 month wait/processing time for our slab wood dining tables.

S H I P P I N G //

Please send zip code for an accurate carrier quote.

D E L I V E R Y //

Some orders within California or Northern NV qualify for personal delivery and installation. Please send zip code for delivery costs to your area.

Size:
Quantity:
Add To Cart

D I M E N S I O N S   //

Starting Price   |   Under 5ft   |   54" - 58"L x 24" - 32"W x 29.5"H   |   $3995+

XSMALL   |   5 ft +   |   60" - 70"L x 24" - 48"W x 29.5"H   |   $4595 - $4795

SMALL   |   6 ft+   |   72" - 82"L x 30" - 48"W x 29.5"H   |   $4845- $5845

MEDIUM   |   7 ft +   |   84" - 94"L x 30" - 48"W x 29.5"H   |   $5895 - $7395

LARGE   |   8 ft +   |   96" - 106"L x 30" - 48"W x 29.5"H   |   $7445 - $9445

XLARGE   |   9 ft +   |   108" - 118"L x 30" - 48"W x 29.5"H   |   $9495 - $11495

XXLARGE   |   10 ft up to 14ft   |   120"+ x 30" - 48"W x 29.5"H   |   please inquire for pricing

W O O D   F I N I S H   O P T I O N S   //

We have three different wood finish options to choose from, each having different durability properties and maintenance requirements:

1.  HARDWAX-OIL  |  Osmo Polyx Oil is derived from natural plant oils and waxes, providing a hard-wearing and protective surface that is resistant to water, soda, wine, etc. The finish maintains the natural look and feel of the wood, all while offering protection and durability. In order to maintain the condition of the wood, we recommend using coasters under serveware containing hot or cold liquids as well as cleaning up spills so as to not leave any moisture to set in over long periods that can cause spots or rings to occur. One major advantage to the hardwax oil is that it’s incredibly easy to repair/maintain, and in the event that minor signs of use occur the finish can be spot repaired with no overlap marks. With Osmo's maintenance liquid wax cleaner it's simple and quick to bring the finish "back to life" (https://worldclasssupply.com/store/OSMO-Liquid-Wax-Cleaner.html?xid=nAvveExJm5amkDObEnAfw5nIUWZBHupu). We are ever-committed to reducing the amount of VOC (Volatile Organic Compounds) we emit during our production process for environmentally conscious reasons, and are also trying to reduce the amount of toxins that our crew is exposed to for health safety precautions. Additionally, the hardwax-oil is a rub-on application (vs. other harsher methods such as spray-on which causes the finish to become airborne). 
COST  |  $0  (included in pricing)

2.  CONVERSION VARNISH  |  Since 2012 we have been using a spray-on low VOC conversion varnish. This finish offers a nice satin sheen with an exceptional durable ‘film’ finish. In our earlier stages after trying out a dozen different finishes, we decided upon the conversion varnish as our primary finish due to the desired sheen of the finish in conjunction with it's superior durability. It is one of the most durable finishes available, while it's chemical makeup allows for elasticity with seasonal wood movement. However it’s important to note that the finish is difficult to repair in the event that any significant damages occur that exposes bare wood, where the wood would need to be transported to a professional to restore the entire surface. For these reasons, we also offer a more easily maintained finish, a hardwax oil (outlined above in option 1).
UPGRADE COST  |  +$95

3.  WATER-BASED CONVERSION VARNISH  |  This option is an ultra-low VOC, water-based wood finish that delivers a quality level similar to oil-based coatings, but without the hazards of traditional solvents. A quick-drying finish that’s true to traditional finishing methods while delivering high-performance durability. The finish has a tendency to "soften" the wood color and give a very slight grey undertone effect with a satin sheen, retaining the natural character of the wood grain.
UPGRADE COST  |  +$95

All wood finish options are low-VOC for peace of mind, yet durable for everyday use. Please note, with ANY finish, taking certain protective precautions will reduce the risk of causing damage to the finish/wood. Here is a link to some suggestions/guidelines that will help maintain the longevity of your table's finish: http://www.mezworks.com/care/

S T E E L   F I N I S H   O P T I O N S   //

1.  CLEAR POWDER-COAT  |  *AS PICTURED IN LISTING PHOTOS*  |  This will preserve the natural color of the steel, but will protect it from staining and rusting and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
UPGRADE COST:
XSMALL - SMALL  |  +$195
MEDIUM - LARGE  |  +$245
XLARGE - XXL  |  +$295

2.  COLOR POWDER-COAT  |  Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
UPGRADE COST:
XSMALL - SMALL  |  +$195
MEDIUM - LARGE  |  +$245
XLARGE - XXL  |  +$295

3.  BLACK MAGIC PATINA + CLEAR POWDER-COAT  |  This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability. 
UPGRADE COST:
XSMALL - SMALL  |  +$245
MEDIUM - LARGE  |  +$295
XLARGE - XXL  |  +$345

C H O O S I N G   T H E   R I G H T   S I Z E   //

For use as a dining or kitchen table, bar or conference table: If you are unsure of the exact dimensions your needs require, consider the following basic guidelines:
- Provide each guest 24-30 inches of space at the dining table (chairs range from apprx 16-20" and require at least 6" of space on each side to allow guests to seat comfortably)
- Add an extra 12 inches at each end for those seated at the head and foot of the table
- Allow for at least 36 inches between the dining table and any walls or other furniture