'Bueller' Leaved Reclaimed Redwood Dining Table // Steel Legs and Inlay

BuellerFallenLeaf_07.jpg
BuellerFallenLeaf_11.jpg
BuellerFallenLeaf_18.jpg
BuellerFallenLeaf_17.jpg
BuellerFallenLeaf_16.jpg
BuellerFallenLeaf_14.jpg
BuellerFallenLeaf_21.jpg
BuellerFallenLeaf_22.jpg
BuellerFallenLeaf_08.jpg
BuellerFallenLeaf_05.jpg
BuellerFallenLeaf_10.jpg
BuellerFallenLeaf_09.jpg
BuellerFallenLeaf_25.jpg
BuellerFallenLeaf_12.jpg
BuellerFallenLeaf_19.jpg
BuellerFallenLeaf_23.jpg
BuellerFallenLeaf_24.jpg
BuellerFallenLeaf_20.jpg
BuellerFallenLeaf_07.jpg
BuellerFallenLeaf_11.jpg
BuellerFallenLeaf_18.jpg
BuellerFallenLeaf_17.jpg
BuellerFallenLeaf_16.jpg
BuellerFallenLeaf_14.jpg
BuellerFallenLeaf_21.jpg
BuellerFallenLeaf_22.jpg
BuellerFallenLeaf_08.jpg
BuellerFallenLeaf_05.jpg
BuellerFallenLeaf_10.jpg
BuellerFallenLeaf_09.jpg
BuellerFallenLeaf_25.jpg
BuellerFallenLeaf_12.jpg
BuellerFallenLeaf_19.jpg
BuellerFallenLeaf_23.jpg
BuellerFallenLeaf_24.jpg
BuellerFallenLeaf_20.jpg

'Bueller' Leaved Reclaimed Redwood Dining Table // Steel Legs and Inlay

from 2,595.00

Available for custom orders only - Exact piece not available. Sizes, pricing and lead times will vary. Please contact us prior to purchase to discuss custom order details at contact@mezworks.com.

S U M M A R Y   //

This design was an adaptation from our original 'Streetsense' conference table, incorporating removable leaf ends and powdercoating the steel legs and inlaid runner in black to give a sleeker, less industrial look to it.

Steel legs are handmade from 1"x3" .083 rectangular steel. A layout jig is used for uniformity and fine sanded corners make for a seamless joint. 

S H I P P I N G   &   D E L I V E R Y   //

Please send zip code for an accurate carrier quote.

Table w/ Leaves:
Quantity:
Add To Cart

D I M E N S I O N S   //

Leaf ends can range from 10-24" deep. Pricing below reflects 10-12" leaves, but can be upgraded to 14-16" leaves for +$25 per leaf, 18-20" leaves for +$35 per leaf, or 22-24" leaves for +$45 per leaf. Please specify a preference when inquiring about a custom table.

Legs are powder-coated black in the example photos, but please note that the powder-coat option is an upgrade and not included in standard pricing. Finish upgrade options are listed below the dimension options.

If you don't see your preferred dimensions below, please let us know and we can outline a custom quote for you.

M E D I U M  |  seats 4 without leaves, seats 6 with leaves  |  $2595
- main table measurements  |  60"L  x  32" - 34"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  32" - 34"W
- table w/ leaves  |  80" - 84"L  x  32" - 34"W  x  28" - 30"H

M E D I U M  /  W I D E  |  seats 4 without leaves, seats 6 with leaves  |  $2770
- main table measurements  |  60"L  x  36" - 38"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  36" - 38"W
- table w/ leaves  |  80" - 84"L  x  36" - 38"W  x  28" - 30"H

L A R G E  |  seats 6 without leaves, seats 8 with leaves  |  $2995
- main table measurements  |  68" - 72"L  x  34" - 36"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  34"W - 36"W
- table w/ leaves  |  88" - 96"L  x  34" - 36"W  x  28" - 30"H

L A R G E  /  W I D E  |  seats 6 without leaves, seats 8 with leaves  |  $3150
- main table measurements  |  68" - 72"L x  38" - 40"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  38" - 40"W
- table w/ leaves  |  88" - 96"L  x  38" - 40"W  x  28" - 30"H

X L A R G E  |  seats 8 without leaves, seats 10-12 with leaves  |  $3355
- main table measurements  |  90" - 96"L  x  36" - 38"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  36" - 38"W
- table w/ leaves  |  110" - 120"L  x  36" - 38"W  x  28" - 30"H

X L A R G E  /  W I D E  |  seats 8 without leaves, seats 10-12 with leaves  |  $3570
- main table measurements  |  90" - 96"L  x  40" - 45"W  x  28" - 30"H
- leaf measurements  |  10" - 12"D  x  40" - 45"W
- table w/ leaves  |  110" - 120"L  x  40" - 45"W  x  28" - 30"H

CUSTOM SIZES ALSO AVAILABLE, PLEASE INQUIRE FOR PRICING

F I N I S H   O P T I O N S   O N   S T E E L   //

1. STANDARD CARNAUBA WAX FINISH | This will allow the color of the steel to remain natural and bright. The steel is ground and polished, followed by several applications of carnauba wax. We will supply you with application instructions and a small wax tin that should last about 5-10 years. Application is simple, rubbing a modest amount on, allowing it to dry, and then rubbing off the excess. 2 applications every few years for maximum effect. Not recommended for humid or coastal climates.
COST | +$0 (included)

2. CLEAR COAT FINISH | This will preserve the natural color of the steel, but will protect it from staining and rusting and requires no upkeep. The steel is ground and polished and will remain natural and bright. 
UPGRADE COST | starting at +$195

3. BLACK MAGIC PATINA FINISH + CLEAR COAT | This finish is going to give off a more industrial look, bringing the color of the legs to a deeper/darker grey. Several hand-rubbed coats are applied to the steel legs, allowing drying times between and repeating the application several times until the desired color is reached. This process combines the patina and clear coat for maintenance-free durability.
UPGRADE COST | starting at +$245

4. POWDER-COAT FINISH | Powder-coating would allow us to achieve just about any color, matte or glossy. If you are unfamiliar with powder-coating, it is a free-flowing dry powder that is applied electrostatically and is then cured under heat to allow it to form a hard finish that it tougher than conventional paint. It's used mainly for coating auto parts, bike parts and outdoor furniture which require super durable and water resistant finishes. Colors are limitless, but typically our clients prefer a simple black powder-coat. We can arrange to have the legs professionally powder-coated by a pro steel shop in our neighborhood, who charges accordingly for different dimensions.
UPGRADE COST | starting at +$350

A D D I T I O N A L   I N F O R M A T I O N   //

Please be aware that redwood is a soft wood and must be treated with care and consideration. For hardwoods, we do offer walnut as an alternative (prices will vary).

C H O O S I N G   T H E   R I G H T   S I Z E   //

If you are unsure of the exact table size your needs require, consider the following basic guidelines:
- Provide each guest 24-30 inches of space at the dining table (chairs range from apprx 16-20" and require at least 6" of space on each side to allow guests to seat comfortably)
- Add an extra 12 inches at each end for those seated at the head and foot of the table
- Allow for at least 36 inches between the dining table and any walls or other furniture